LoadSlammer Pro OracJr最大电流范围为1500A,1500W,可与LoadSlammer主动适配器一起使用。连续功率输出有源适配器。由24V桶形插孔供电,并由USC-C连接。LSPOracJr也被称为“大脑”,它控制主动称重传感器适配器。有源称重传感器适配器通常专门为定制CPU/ASIC部署而设计。
套件内容及附件
LoadSlammer Pro Orac Jr设备
USB 2.0 A型至C型电缆
24V电源适配器
北美电源线
连接Orac Jr的有源适配器电缆
Parameter | Min | Typ. | Max | Unit | |
Timing Characteristics | |||||
Rise Time | 40 | nS | |||
On Time Range | 7.5µ | N/A | Sec | ||
Load Characteristics | |||||
Current Range | 5 | 500 | A | ||
Current Resolution | 1 | A | |||
Current Output Accuracy | 5 | % | |||
Input Voltage Rating | 0.6 | 2.0 | V | ||
Current Sense Output | |||||
Conversion Ratio | 50 | 250 | A/V | ||
Max Current | single device | 1000 | A | ||
Current Readout Accuracy | 5 | % | |||
Sampling System | |||||
Sampling Rate | 10 | MSPS | |||
Bandwidth | 5 | MHz | |||
Capture Depth | 24 | kPoints | |||
Power Dissipation Characteristics | |||||
Continuous Power Dissipation | 1000 | W | |||
Instantaneous Power Dissipation | 1000 | W | |||
Device Connection | |||||
DUT Connector | Vertical | HSEC8-140-01-S-DV-A | |||
Right Angle | HSEC8-140-01-L-RA | ||||
Edge Mount | HSEC8-140-01-S-D-EM2 | ||||
Keepout Drawing and Pinout | https://loadslammer.com/connector/ | ||||
Non-Isolated | LoadSlammer Pro Orac-Jr must be used with an active adapter that has a positive voltage. The USB data connection is non-isolated, this effectively grounds the DUT’s ground. |